100% Blackout roller blinds IN cassette internal G L

Blackout roller blind in cassette with guides - This listing offers roller blinds with blackout fabric from groups G and L. The fabrics block 100% of sunlight. Fabrics from group G are made with similar colors on both sides, while group L fabrics have a silver coating on the outer side. - The housing is made of aluminum and painted white or brown. - The blind is ready to install right after unpacking. All necessary mounting components are included. - The blind does not interfere with vents installed at the top of the window, as it is mounted only on the glazing bead. - The blind features a self-locking chain mechanism allowing it to stop at any height. - Materials used are coated with impregnation, sealing the fabric and preventing excessive dust accumulation. - The blinds fit perfectly on PVC, aluminum, and wooden windows, becoming an integral part of the window after installation. - The cassette protrudes only 3.8 cm from the window. - The guide covers are 3.2 cm wide, covering gaps and holding the fabric when the window is tilted; they are made of PVC and attached with strong foam tape. - For balcony windows with a horizontal bar, two units should be ordered. - Screen colors may slightly differ from actual colors. Roller blinds in cassette up to 160 cm height width A of the blind in the range 0cm to 50cm - order 100 pcs width A of the blind in the range 50.1cm to 60cm - order 120 pcs width A of the blind in the range 60.1cm to 70cm - order 140 pcs width A of the blind in the range 70.1cm to 80cm - order 160 pcs width A of the blind in the range 80.1cm to 90cm - order 180 pcs width A of the blind in the range 90.1cm to 100cm - order 200 pcs width A of the blind in the range 100.1cm to 110cm - order 220 pcs width A of the blind in the range 110.1cm to 120cm - order 240 pcs width A of the blind in the range 120.1cm to 130cm - order 260 pcs width A of the blind in the range 130.1cm to 140cm - order 280 pcs width A of the blind in the range 140.1cm to 150cm - order 300 pcs Roller blinds in cassette up to 230 cm height width A of the blind in the range 0cm to 50cm - order 140 pcs width A of the blind in the range 50.1cm to 60cm - order 168 pcs width A of the blind in the range 60.1cm to 70cm - order 196 pcs width A of the blind in the range 70.1cm to 80cm - order 224 pcs width A of the blind in the range 80.1cm to 90cm - order 252 pcs width A of the blind in the range 90.1cm to 100cm - order 280 pcs width A of the blind in the range 100.1cm to 110cm - order 308 pcs width A of the blind in the range 110.1cm to 120cm - order 336 pcs width A of the blind in the range 120.1cm to 130cm - order 364 pcs width A of the blind in the range 130.1cm to 140cm - order 392 pcs width A of the blind in the range 140.1cm to 150cm - order 420 pcs How to measure and order a cassette roller blind? STEP 1 take measurements, choose colors and finalize order details STEP 2 place Buy Now remembering that the blind cost is calculated based on width A and provide order details by email or in a message to the seller e.g. blind no. 1 A=95.4 B=91.2 C=154.5 cm right side control housing color white fabric color G20 Top view / cross-section and measurement method for different glazing bead shapes 1. measurement for a traditional bead with a flat surface equal to or greater than 5 mm 2. measurement for a bead without a flat surface 3. measurement for a bead without a flat surface with a groove at least 5 mm wide 4. measurement for a shaped bead with a flat surface equal to or greater than 5 mm 5. measurement for a bead with a wide bevel and a flat surface equal to or greater than 5 mm 6. measurement for a bead with a wide bevel and no flat surface 7. measurement for windows without glazing beads where: A: housing width, i.e. glass width + both full glazing beads including their flat parts (measurement point is the joint of the bead with the window frame, this width will be the blind housing) B: fabric width, i.e. width between beads minus 0.5 cm (in other words, glass width plus rubber seals minus 0.5 cm so the fabric does not pinch, the difference between widths should be about 4 cm, this will be the fabric width) C: fabric height, i.e. glass height + both full glazing beads including their flat parts (measurement point is the joint of the bead with the window frame) S: glass with rubber seals R: groove to be filled with double-sided adhesive foam - Control: side where the control will be located - usually opposite the handle side. - Fabric color: fabric symbol from the color chart on the listing. - Housing color: white or brown Color chart Group G Color chart Instru