Set OF trolleys for heavy sliding gates 80x80 trolley sliding gate rollers

Complete set of 10-roller trolleys for sliding gates - set with accessories for 80x80 rail

Complete set of 10-roller trolleys for sliding gates - set with accessories for 80x80 rail includes:

• two running trolleys,
• approach roller with end stop,
• approach bracket 70/80 with rollers,
• guide roller,
• top bracket,
• information on correct trolley spacing during installation.

The trolley set for sliding gates with accessories from the WDB brand is a set of precisely matched components made from highest quality materials, with enhanced resistance to abrasion and mechanical damage, ensuring many years of trouble-free gate operation.

Every steel part has been fully galvanized, making the product resistant to weather conditions and corrosion.

✅HIGH WORKING QUALITY

✅POLISH BRAND

Running trolley - 2 pieces in the set

☑️ dedicated to 80 x 80 rail

☑️ 10-roller trolley, steel rollers with increased hardness and reduced abrasion, making them more durable and long-lasting

☑️ adjustable vertically and horizontally - allows perfect fitting of the trolley to the sliding gate

☑️ features a recessed vertical plate - facilitates access to mounting screws and simplifies trolley adjustment, making installation and setup of the entire structure easier

☑️ equipped with 6204Z ERI-3 bearings - these produce significantly less noise and have greater durability than standard bearings

☑️ dimensions [mm]: A: 180 A1: 140 B: 120 B1: 60 C: 61 C1: 17 D: 68 H: 153-170

Approach roller with end stop

☑️ dedicated to 80x80 rail

☑️ facilitates gate insertion into the socket

☑️ bearing steel roller - has high abrasion resistance and features very low rolling resistance

▶️ Specification

• material: high-quality, high-strength steel
• product fully galvanized
• installation: screw to the gate guide using two mounting screws

Approach bracket

☑️ designed for self-supporting sliding gates, fits 70x70 mm and 80x80 mm rails

☑️ features a rubber bumper that absorbs the impact energy between the rail and the socket

☑️ the bracket has two rubber rollers that facilitate gate insertion into the socket

☑️ equipped with special holes at the end that prevent water accumulation

☑️ properly shaped bracket walls ensure smooth seating in the socket

▶️ Specification

• material: high-quality steel + flexible and durable rubber
• steel part fully galvanized
• precisely made rubber parts with high abrasion resistance, effectively absorbing even strong impact forces
• installation: socket has two mounting holes
• dimensions: A: 100 mm C: 90 mm D: 40 mm H: 80 mm S: 4 mm

FREE guide roller - choose between angle bracket guide roller or vertical roller Adjustable roller on angle bracket

☑️ Bearing roller - significantly improves working smoothness and component lifespan.

☑️ Available angle bracket rollers in sizes Ø 33 mm, Ø 35 mm.

☑️ Dimensions [mm]:

Roller Ø 33 mm: A: 61 B: 33 C: 12 D: 5 E: 84 F: 40

Roller Ø 35 mm: A: 61 B: 35 C: 12 D: 5 E: 84 F: 40

Vertical roller

☑️ Available vertical rollers in sizes Ø 25 mm, Ø 30 mm, Ø 32 mm, Ø 35 mm, Ø 40 mm, Ø 42 mm.

☑️ Dimensions [mm]:

Roller Ø 25 mm: D: 25 H: 75 H1: 35 M: 12

Roller Ø 30 mm: D: 30 H: 75 H1: 35 M: 12

Roller Ø 32 mm: D: 32 H: 75 H1: 35 M: 12

Roller Ø 35 mm: D: 35 H: 75 H1: 35 M: 12

Roller Ø 40 mm: D: 40 H: 75 H1: 35 M: 16

Roller Ø 42 mm: D: 42 H: 80 H1: 38 M: 16

Please specify in the comments which roller you choose. If no information is provided, we will send the Ø 35 mm roller on angle bracket. FREE top bracket - choose size 40, 60 or 80.

The bracket is designed to stabilize the gate in the closed position, preventing lateral movements (which could be caused, for example, by strong wind gusts).

The element features a bumper and two rubber rollers, minimizing noise during gate insertion and facilitating closing. Steel parts are galvanized.

Dimensions [mm]:

Bracket 40mm: L: 40 B: 70 H: 76 H1: 50 S: 5

Bracket 60mm: L: 60 B: 70 H: 76 H1: 50 S: 5

Bracket 80mm: L: 80 B: 70 H: 76 H1: 50 S: 5

Please specify in the comments which bracket you choose. If no information is provided, we will send the 40 mm bracket. Frequently Asked Questions (FAQ) 1️⃣ How to choose the trolley size for a sliding gate?

The trolley size 60 / 70 / 80 defines the width of the guide rail on which it should run. This is the rail width measured including side walls.

For example, if the total rail width (i.e. width of both side walls + width of the trolley running surface) is 60 mm, the dedicated trolley size is 60. If the total rail width including side walls is 70 mm - choose trolley size 70, and so on.

2️⃣ How to choose the type of trolley for a sliding gate?

The number of rollers in the trolley determines the gate width.

• 3-roller trolleys are suitable for gates under 3 meters wide.
• 5-roller trolleys are used for sliding gates from 3 to 6 meters wide.
• 8-, 9-, and 10-roller trolleys are suitable for gates wider than 6 meters.

3️⃣ What else to consider when choosing trolleys for gates?

• adjustability - allows perfect fitting of the sliding gate wing guiding elements.
• corrosion resistance - choose fully galvanized trolleys to ensure rust resistance.
• bearing type - directly affects the durability and smoothness of the entire sliding system.

4️⃣ Why choose WDB brand trolleys and accessories for sliding gates?

Trolleys and accessories from the Polish brand WDB are characterized by excellent fit to dedicated guide rails. Thanks to adjustability, they allow even load distribution, which significantly impacts smooth gate operation and long mechanism lifespan. Choosing WDB products guarantees quality and reliability.

5️⃣ How to adjust a sliding gate?

Adjustment and maintenance are crucial tasks that will allow you to enjoy smooth and trouble-free sliding gate operation for many years.

Step-by-step sliding gate adjustment:

1. Check the running track - clean it from all debris (stones, sand, leaves, etc.) and verify there are no level deviations.
2. Check the condition of rollers and trolleys - ensure they are in good technical condition.
3. Lubricate the running trolleys - grease reduces friction, making trolley operation more efficient and reducing wear of mechanical parts.
4. Adjust the running trolleys - loosen mounting screws and move the trolleys so the gate is perfectly level. After correct leveling, tighten the mounting screws firmly. Remember both gate trolleys must be installed in one line and at the same level.
5. Check other accessories - upper guide alignment, condition of bumpers, approach elements, brackets, etc.
6. For automatic gates - verify proper adjustment of the drive and sensors according to the manufacturer's instructions.
7. Perform a test - start with a manual test to ensure the gate moves without obstacles, then perform a test using the automation.

By choosing our sliding gate trolley set you get:

⭐️ a set of highest quality from a renowned Polish brand

☔️ a product resistant to moisture - will not rust

⚙️ accessories easy to install with adjustability

⌛️ a solution for years - install once and enjoy reliable mechanism operation for years