Irrigation controller timer mechanical clock

IRRIGATION CONTROLLER TIMER MECHANICAL CLOCK WATER 3/4” 1”

Shark Tools irrigation controller is a mechanical water flow timer that allows you to set watering time from 0 to 120 minutes. After the selected time elapses, the device automatically shuts off the water supply, so you don't have to monitor watering manually.

The controller operates without electricity or batteries — it uses a spring mechanism. It is suitable for garden sprinklers, hoses, drip lines, soaker hoses, lawn watering, flower beds, vegetable gardens, greenhouses, and allotments.

✅ Operating time 0–120 minutes – set watering duration and forget about watching the tap

✅ Automatic water shut-off – controller closes the flow after the cycle ends

✅ Manual On mode – allows continuous flow without time limit

✅ No batteries or electricity – mechanical spring-driven operation

✅ For sprinklers, hoses, and drip lines – versatile garden use

✅ 3/4" and 1" thread – fits common garden taps

✅ Maximum pressure 6 bar – suitable for typical garden installations

✅ Mesh filter – helps reduce impurities in the system

✅ ABS material – moisture and UV resistant

✅ Easy knob operation – quick watering time setting

Watering without watching the tap

Shark Tools irrigation controller lets you set water flow time and automatically stops watering after the selected time. This practical solution is ideal when you want to water your lawn, flower beds, or vegetable garden without remembering to turn off the tap manually.

Operating range up to 120 minutes

The knob allows setting the operating time from 0 to 120 minutes. After the set time, the controller automatically shuts off the water supply. This reduces the risk of overwatering plants and unnecessary water waste.

Manual On mode

Besides timed operation, the controller features a Manual On mode that enables continuous water flow without a time limit. Useful when watering manually, filling a tank, or using a hose without automatic shut-off.

Battery-free operation

The device requires no batteries, electricity, or electronic programming. The spring mechanism activates after setting the knob, making the controller easy to use and ready to operate immediately after connection.

For sprinklers and watering systems

The controller can be used with garden hoses, sprinklers, soaker hoses, drip lines, and other watering accessories. Suitable for daily watering of gardens, allotments, greenhouses, lawns, and vegetable patches.

Mesh filter included

The built-in mesh filter helps trap small impurities in the water. This is especially important for sprinklers, drip lines, and accessories prone to clogging.

Durable ABS housing

The body is made of ABS plastic, resistant to moisture and UV radiation. The material performs well for seasonal outdoor use on garden taps or watering installations.

Where to use the controller?

For garden sprinklers – set lawn watering time and don't watch for the end of operation.

For garden hoses – convenient flow control during manual watering.

For soaker hoses – slower watering of flower beds, hedges, or vegetable gardens.

For drip lines – controlled operating time of irrigation systems.

For greenhouses and tunnels – timed watering of plants under covers.

For lawns – regular watering of turf in the morning or evening.

For allotments – simple solution without batteries, apps, or programming.

Example applications

Lawn

Connect the controller to the tap, set watering time, and attach a sprinkler. After the set time, water will be automatically shut off.

Vegetable garden

The controller can supply a soaker hose or drip line placed near garden beds. Convenient for watering tomatoes, cucumbers, peppers, lettuce, and other vegetables.

Flower beds and hedges

The device allows setting a specific watering time for ornamental plants, thuja, shrubs, and young plantings without manual flow control.

Greenhouse

The controller helps maintain regular watering times for plants under covers, especially when using drip lines or watering hoses.

How to use

1. Mount the controller on the tap

Attach the controller to a garden tap with a 3/4" or 1" thread. Ensure the connection is stable and leak-proof.

2. Connect hose or watering system

Connect a garden hose, sprinkler, drip line, soaker hose, or other watering accessory to the controller outlet.

3. Set operating time

Turn the knob to the desired operating time between 0 and 120 minutes.

4. Turn on water

Open the tap after setting the time. The controller will allow water flow for the set duration.

5. Automatic watering stop

After the set time elapses, the controller will shut off the water supply.

6. Interrupt cycle

To stop watering earlier, turn the knob back to the 0 position.

Best suited for?

Home gardens – for lawns, flower beds, hedges, and vegetable gardens.

Allotments – for simple watering without electronic timers.

Greenhouses – for watering drip lines or soaker hoses.

Lawns – for oscillating, rotary, or pulsating sprinklers.

Flower beds – for timed watering of ornamental plants.

Young plantings – for regular and controlled irrigation.

FAQ – Frequently Asked Questions

1. Does the Shark Tools controller require batteries?

No, it operates mechanically with a spring and requires no batteries or electricity.

2. What watering time can be set?

The operating time can be set from 0 to 120 minutes.

3. Does the controller shut off water automatically?

Yes, it automatically stops water flow after the set time.

4. Can watering be continuous without time limit?

Yes, the Manual On mode allows unlimited flow.

5. Can watering be stopped earlier?

Yes, turn the knob back to the 0 position.

6. What tap threads does the controller fit?

It fits taps with 3/4" and 1" threads.

7. Can a sprinkler be connected?

Yes, it works with garden sprinklers, hoses, drip lines, and soaker hoses.

8. What is the maximum operating pressure?

The maximum pressure is 6 bar.

9. Is a filter included?

Yes, a mesh filter is included.

10. Is it suitable for drip lines?

Yes, it can supply drip lines or soaker hoses for the set time.

11. Is the device electronic?

No, it is a mechanical water flow timer.

12. How to store the controller after the season?

Disconnect it from the tap, drain water, and store in a dry place protected from frost.

Technical specifications

Product: irrigation controller

Brand: Shark Tools

Type: mechanical water flow timer

Time setting range: 0–120 minutes

Automatic mode: yes

Manual On mode: yes

Automatic flow shut-off: yes

Manual stop option: yes

Mechanism: spring-driven

Power supply: not required

Batteries: not required

Maximum operating pressure: 6 bar

Connection thread: 3/4" and 1"

Material: ABS

Resistance: UV and moisture

Mesh filter: yes

Dimensions: 15.5 × 8.1 × 6.7 cm

Weight: approx. 220 g

Weight with packaging: approx. 0.23 kg

EAN: 5906679101510

Manufacturer code: IRRIGATION CONTROLLER TIMER

Condition: new

Packaging condition: original