Manifold Set 5 Solenoid Valves 100HV Filter

Manifold Set 5 Solenoid Valves 100HV Filter Specification :

• Irrigation connection kit.
• Number of circuits - 5
• Complete set

Set for connecting 5 irrigation zones.

Of course, the set can be used for fewer zones - leaving one outlet unused as a spare.

The set is complete.

Set dimensions

length approx. 60 cm

width approx. 30 cm

height approx. 25 cm

The set includes:

• Manifolds for solenoid valves - 1 pc x 3 circuits, 1 pc x 2 circuits.
• Rain-Bird 100HV solenoid valves - 5 pcs
• Main ball valve - 1 pc
• Disk filter - 1 pc
• Drain kit including ball valve and compressor fitting - 1 set
• PE pipe fittings Ø 25
• Fittings required to assemble the set

Between the filter and the manifold in the set, there is an additional element. After removing it, you can install the main solenoid valve, which will protect the system - it will open together with each solenoid valve on every zone.

Using such a valve is not mandatory, but almost every controller has an output for a Master main valve - so if needed, you can use this valve without complicated modifications to the set.

Specification - set components:

1. Rain-Bird 100HV solenoid valves - 5 pcs. The most popular solenoid valve on the market.

2. Manifolds: 1 pc / 3 CIRCUITS, 1 pc / 2 CIRCUITS - the selected solenoid valve model is mounted on the manifolds. Solenoid valves available in our other offers.

3. Main ball valve 1 pc - the main water supply is connected to this valve. It allows shutting off water in the irrigation system.

4. Disk filter 1 pc - protects devices such as sprinklers and irrigation lines from impurities in the water supply. It effectively traps contaminants like sand, silt, and other debris that could damage the system. Cleaning the filter is done by unscrewing the housing, removing the disks, and rinsing them. This design eliminates the need to replace filter cartridges.

5. Drain kit - The drain valve is used to empty water from the irrigation system before winter. Draining prevents damage caused by freezing temperatures. It protects the entire irrigation system (sprinklers, solenoid valves, etc.). Thanks to the compressor fitting, you can also blow out the system and sprinklers using a compressor, pump (car or hand pump), etc.

6. PE fittings Ø 25x1" M - 6 pcs. Fittings for connecting PE Ø 25 pipe to the set.

7. Components (fittings) needed to assemble the set (elbows, nipples)