Marley rainwater collector FI 80-87-90-100-105 water filter graphite

EFFECTIVE YEAR-ROUND COLLECTOR FOR WATER FROM 80 - 105 MM DOWNPIPE TO RAINWATER TANK

Color: Anthracite

Advantages of the rainwater collector with winter-summer function:

• The collector can be used with PVC and metal downpipes with diameters: 80 mm, 87 mm, 90 mm, 100 mm, 105 mm
• Quick and easy switching between summer and winter use, winter-summer function
• High efficiency, captures up to 95% of rainwater
• Conical filter captures leaves and larger debris, its special design facilitates their fall down the downpipe
• High-quality plastic, frost-resistant and UV durable
• Easy and quick installation — without dismantling the downpipe
• Attractive and elegant design
• Outlet spigot of the collector with diameter 25.4mm 1"

Manufacturer: MARLEY

MADE IN GERMANY

The water collector captures rainwater from the downpipe until the water in the tank reaches the level where the collector is installed. Excess water flows further down the downpipe.

An additional short 1" garden hose and a spigot for tank installation are required. Hose and tank spigot are not included in the set.

Fig.1 Rainwater is diverted to the tank/barrel.

Fig.2 Maximum fill level of the tank/barrel = overflow height.

1. Mounting the collector on the downpipe.

2. The connection height of the collector determines the maximum water level in the tank.

COLLECTOR CONSTRUCTION:

1. Connection for downpipes 80 - 105mm, switching from summer to winter use
2. Easy to clean filter basket
3. Integrated 25.4 mm (1") hose connection
4. Downpipe connection, cut area covered

SUMMER / WINTER FUNCTION - EASY SWITCH BETWEEN SUMMER AND WINTER USE.

A) Detach the upper part of the water collector from the lower part and slide it upwards (1). Remove the lower part from the downpipe (2).

B) Remove leaves and larger debris from the filter. For thorough cleaning, the filter basket can also be removed.

C) Reattach the lower part, connect upper and lower parts by turning the arrow on the upper part to the snowflake symbol - winter function. In this position, rainwater flows only through the downpipe to the drain. One plug closes the collector outlet, the other opens the internal gutter drain so rainwater does not accumulate in the collector (all water flows down the downpipe).

Quick and easy installation — without dismantling the downpipe. Universal use for PVC and metal downpipes with diameters from 80 to 105 mm.

1. Mark the upper edge of the rainwater collector on the downpipe, 95 mm below the second mark.

2. Cut (1) the downpipe at the marked points and deburr it thoroughly (2) to maximize collection efficiency.

3b. Carefully trim (e.g. with a knife) the upper part of the collector (pre-perforated circles for diameters: 80, 87, 90, 100, 105 mm) to the external diameter of the downpipe and slide it onto the upper downpipe.

4. Slide the lower part of the collector onto the lower downpipe (1). Press-fit the upper and lower parts of the rainwater collector (2).

5. Done! The rainwater collector is ready to use immediately.