Protective film glossy PPF wrap wing fenders Dacia bigster 2025 2026

PPF PROTECTIVE FILM TURTLE ARMOR FOR EXTERIOR OF DACIA BIGSTER 2025, 2026 -> Film components included in the set: Front wing fenders HIGHEST LEVEL OF PROTECTION FOR YOUR VEHICLE High-quality clear protective PPF (Paint Protection Film) designed to safeguard car body parts and interior elements from everyday mechanical damage and external factors. The clear PPF Turtle Armor film is an effective solution for protecting automotive paintwork, helping to maintain the perfect appearance of your vehicle for a long time. It features high resistance to mechanical damage. It effectively protects the paint from stone chips, scratches caused by daily use, as well as sand and other small debris on the road. This keeps the bodywork in excellent condition even with intensive vehicle use. When properly installed, the film is practically invisible while creating a very durable, flexible protective barrier. The clear PPF Turtle Armor film is also used inside the vehicle to protect the most vulnerable wear areas such as door sills, painted parts, door panels, around handles, the center console, and the multimedia screen. The film protects these surfaces from scratches, scuffs, fingerprints, and minor damage that quickly appear during daily use. PRODUCT ADVANTAGES: Clear and invisible after installation - no impact on vehicle appearance. Minor scratches fade under heat (sunlight, warm water). High resistance to stone and gravel impacts. Protects paint from scratches, chips, road salt, insects, bird droppings, and road chemicals. UV filter - no yellowing of the film. Flexible structure - perfect fit to body contours. Safe for paint - does not cause damage upon removal. Resistant to hand and automatic car washes (after curing period). Easy application - film is flexible and conforms well to body shapes. Easy removal - leaves no adhesive residue and does not damage paint. Temperature resistant - maintains properties in both low and high temperatures. INSTALLATION INSTRUCTIONS Thoroughly wash and degrease the part (e.g., IPA). Surface must be clean, dry, and cool. Work at 15-25°C. Prepare installation solution - distilled water + 1-2 drops of dish soap or car shampoo. Spray the surface and adhesive side of the film with the solution. Apply the film to the part and position it correctly. Use a squeegee (e.g., rubber) to push out water and air from the center outward. If needed, gently heat the film with a hairdryer or heat gun (low temperature). Press edges firmly. After installation: Do not wash the car for 48 hours. Avoid high temperatures and automatic car washes for several days. 70557165 PPF14874