Rossner Silicone Ice Mold 2 Round Ice Balls

Silicone mold for ice balls XXL size: ball diameter approx. 4.5cm 1 cube - 1 drink 6 balls per mold Color packed randomly depending on availability: black, blue, yellow, red, orange, green This mold produces perfect ice balls but requires following the instructions below; otherwise, due to the non-standard joint (below the water line), the mold will start leaking. Usage instructions: 1. Both halves must be DRY before joining; otherwise, water will prevent a tight silicone seal. 2. Place the joined mold on a flat surface and press down on the spaces between the balls from above. 3. Carefully pour water through the funnel into each ball. DO NOT overfill as water will push the upper part of the mold and cause leaks. 4. After filling, check for leaks. 5. Place in the freezer on a FLAT surface.