Well head for well 160 x 5/4"
52 €
Buying 2 pcs: 50 €/pc
Buying 3 pcs: 50 €/pc
Buying 4 pcs or more: 49 €/pc
Delivery time: ~5 business days.
Supplier
Studnie_Madej
100% positive reviews
Rating
Popularity
In stock
Delivery
Delivery time: approximately 5 business days in Lithuania.
Buyer review
“Generally okay. I suggest routing the cable so you can "cut a notch on the side of the pipe" to avoid disassembling the pump plug (if it is non-disassemblable). For the Fi 160 SN8 (thick-walled) pipe, I had to wrap a layer of tape on the pipe first so the well head would fit snugly – pipes of the correct diameter, purchased for wells! Simply placing it on a bare, cut pipe results in lateral play – seems like a diameter printing error (or it’s intentional, which I doubt). Ideally, there would be some rubber or an O-ring inside so the well head wouldn’t "rotate" on the pipe.”
Description
The well head is an extremely important component of every well. By isolating the interior of the well from the surface side, it affects the quality of the water drawn from the well – it prevents rainwater and solid contaminants such as sand, leaves, insects, animals, etc. from entering the well. It also allows for the secure suspension of a submersible pump, for example on a steel cable, so that it does not touch the bottom of the well. Thanks to technical openings on its surface, it is also possible to sealably pass the electrical cable powering the pump and the delivery pipes.
ADVANTAGES OF THE WELL HEAD
- DURABILITY - solid steel construction coated with a zinc anti-corrosion layer
- DELIVERY PIPE COUPLING - universal size 5/4" (1 1/4")
- CABLE GLAND - enables sealed passage of the pump power cable
- PUMP SUSPENSION BRACKET - for proper suspension of the submersible pump
- WEATHER RESISTANCE - the well head is resistant not only to water but also to temperature and chemical agents
- MECHANICAL STRENGTH - thanks to the steel construction, the well head can withstand heavy loads without deformation
TECHNICAL DATA
- galvanized steel construction
- base made of weather-resistant plastic
- casing pipe diameter - 160 mm
- hydraulic connection diameter - 5/4" (1 1/4") - suitable for PE 25, PE 32 pipes
- cable gland for pump power cable
- mounting bracket for suspension cable
- Polish manufacturer
INSTALLATION
- Pass the submersible pump power cable through the cable gland and then tighten it manually
- Install the delivery pipe fittings adapted to the appropriate PE pipe diameter – galvanized reducers can be used first
- Attach the delivery pipe to the coupling under the well head and then tighten it manually
- Place the well head onto the well casing pipe
Check out our other offers – we have manual well drilling kits, slurry pumps, and a wide selection of well filters!
If you have any questions, we are here to help – contact details are available in the tab at the bottom of the page.
Specification
| Condition | New |
|---|---|
| Condition | New |
| Invoice | VAT invoice issued |
| Manufacturer code | G 160mm |
| EAN (GTIN) | 5904183106397 |