Trolley Rollers for Sliding Gate 80x80x5 8 Rollers Made in Poland

Polish product :

- 100% MADE IN POLAND

- Polish manufacture, not an "importer brand"

The trolleys use more sealed 2RS bearings

• RS - BUTYL side seal of the bearing (black), not metal ZZ (silver) - less sealed metal shield type ZZ.
• Butyl synthetic elastomer (the same material as in Simering seals) characterized by high gas and water tightness, good chemical resistance, and flexibility over a wide temperature range, providing better contact and sealing with both bearing rings.

Photos of RS bearing roller vs ZZ

8-roller trolley for 80x80x5 rail

Trolleys with two horizontal rollers, dedicated for gates with significant filling. Such a gate wing behaves like a 'sail' in the wind, and these two horizontal rollers support smooth gate operation on windy days.

• Rollers: 68.5 mm × 19 mm, steel
• Adjustment platform (bottom plate): 180 × 120
• Coating: electro-galvanized zinc

Trolley weight: 7.8 kg

Trolley application:

• Gate weight: up to 1000 kg (with two trolleys)
• Gate opening width: 7-9 m

Our trolleys are also available in sets on other Allegro listings

NOTE!

Please carefully check the dimensions of your rail (profile). We specify dimensions by measuring the length of the side on the outside of the profile and the wall thickness with calipers. Our rollers are matched to a specific profile – the dimension is not averaged as with many Chinese products. This ensures precise gate operation. The set includes installation instructions with exact parameters for trolley spacing according to gate weight and length.

Bottom of trolley (top plate)

We are the only ones on the market using a wider trolley base:

• 120 mm width, not 100 mm like other trolleys
• large 'bean-shaped' slots which combined with the same slots on the bottom plate (adjustment platform) provide the largest adjustment range during installation.

Trolley platform (bottom plate)