Manifold Set with 3 Solenoid Valves 100HV Filter

Manifold Set with 3 Solenoid Valves 100HV Filter Specification :

• Irrigation connection kit.
• Number of circuits - 3
• Complete set

Set for connecting 3 irrigation zones.

The set can of course be used for fewer zones - leaving one outlet unused as a spare.

The set is complete.

The set includes:

• Manifolds for solenoid valves - 1 pc x 3 circuits.
• Rain-Bird 100HV solenoid valves - 3 pcs
• Main ball valve - 1 pc
• Disk filter - 1 pc
• Drain kit including ball valve and compressor fitting - 1 set
• PE pipe fittings Ø25
• Fittings required to assemble the set

Between the filter and the manifold in the set, there is an additional element. After removing it, you can install the main solenoid valve which will protect the system - it will open simultaneously with each solenoid valve on every zone.

Using such a valve is not mandatory, but almost every controller has an output for a Master valve - so if needed, this valve can be used without complicated modifications to the set.

Specification - set contents:

1. Rain-Bird 100HV solenoid valves - 3 pcs. The most popular solenoid valve on the market.

2. Manifolds: 1 pc / 3 CIRCUITS - the selected solenoid valve model is mounted on the manifolds. Solenoid valves available in our other offers.

3. Main ball valve 1 pc - the main water supply is connected to this valve. It allows shutting off water in the irrigation system.

4. Disk Filter 1 pc - protects devices such as sprinklers and irrigation lines from impurities in the water supply. It effectively traps contaminants like sand, silt, and other debris that could damage the system. Cleaning the filter involves unscrewing the housing, removing the disks, and rinsing them. This design eliminates the need to replace filter cartridges.

5. Drain kit - The drain valve is used to empty water from the irrigation system before winter. Draining prevents damage caused by freezing temperatures. It protects the entire irrigation system (sprinklers, solenoid valves, etc.). Thanks to the compressor fitting, the system and sprinklers can be blown out using a compressor, pump, car pump, hand pump, etc.

6. PE fittings Ø25x1" M - 4 pcs. Fittings for connecting Ø25 PE pipe to the set.

7. Components (fittings) needed to assemble the set (elbows, nipples)

You can purchase a valve box for the set in our other listings.

Recommended valve box models for this set:

• STANDARD VALVE BOX - fits tightly
• Recommended: JUMBO VALVE BOX

The valve box is not included in this set.